3+1Buttons WAZSKE13D01 49CHIP 315MHz Smart Key for Mazda 3 Sedan

Tips

1. Please visit your local auto locksmith to programming the key before you use the key.

2. The Mazda smart key has three buttons: unlock button, lock button, and trunk open button. When the car owner enters the sensing area of the key system and touches the door handle with his hand, the identification "key" he carries will receive the low-frequency signal sent by the car. If this signal is consistent with the identification information saved in the "key," Key" will be awakened. After the "key" is awakened, it will analyze the authentication password issued by the car and send corresponding signals. These signals are encrypted to improve security.

3. Mazda 3 Sedan touch sensor failure warning sound (with advanced remote control function), if all of the following conditions are met, activating the warning sound will notify the driver that the door is unlocked:

• Turn off the ignition switch.
  

• All doors are not fully closed.
  

• The lock was operated three times within 5 seconds.
  

Check the ignition switch and check whether the door is opened or closed before operating the lock again.

4.Mazda3 Sedan key left in trunk warning sound (with advanced remote control function), if the key is left in the trunk, all doors are locked, and the trunk lid is closed, a beep will be heard outside the car for about 10 seconds This sound is used to notify the driver that the key is left in the trunk. In this case, open the trunk lid by pressing the electronic trunk lid opener and remove the key. A key taken out of the trunk may not work because its functionality is temporarily stopped. If the functionality of the key is to be restored, the key abort function should be performed.