4+1Buttons KBRASTU51 Remote Control Key for 2004-2010 Nissan Quest

Tips

1. This is a complete remote key with battery, chip, board, key case for 2004-2010 Nissan Quest.

2. Before use, you need to program the key at your local car locksmith.

3. We should take good care of the smart car key when using the car. If the smart key is often bumped or dropped from high places, it will also cause the key system to malfunction due to poor internal circuit contact of the remote key.

4. If the system cannot sense because the smart key is out of power, the solution is to replace the key's battery. If it still doesn't work after replacement, you can put the key close to the one-button start and try to start and use the vehicle's self-inspection to see if the fault can be eliminated.

5. When the vehicle is parked on a hill and the driver releases the brake pedal and presses the accelerator, Hill Start Assist will automatically maintain braking to help prevent the vehicle from rolling backwards. Hill Start Assist will operate under the following conditions: Run automatically below:

Move the shift lever to forward or reverse.

By applying the brakes, the vehicle comes to a complete stop on the hill.
The maximum hold time is 2 seconds. After 2 seconds, the vehicle will begin to reverse and Hill Start Assist will cease to operate completely.
Hill start assist will not work when the gear lever is moved to N (Neutral) or P (Park) or on flat surfaces.