TYPE: | |
---|---|
SKU: | |
Availability: | |
Quantity: | |
Product Description
FCC ID | KR5S180144014 |
P/N | 285E3-9PA5A / 285E3-9PB5A |
Continental | S180144008 |
IC | 7812D-S180014 |
Frequency | 433.92MHz |
Button | Lock, Unlock, Hatch, Remote Start, Panic |
Battery | CR2032 |
Factory | Aftermarket / OEM |
For | 2013-2016 Nissan Pathfinder Platinum |
Tips
1. The product includes key shell, circuit board, chip and battery. This is a complete smart key for 2013-2016 Nissan Pathfinder Platinum.
2. It is imperative that you have your key programmed and vehicle paired by visiting a locksmith in your local area before using the key.
3. The circuit of the remote control has poor contact. If this happens, you can take the smart key to a specialized repair shop or 4S shop for inspection and repair.
4. The receiver in the car is faulty. When the remote controls are tested and found to be normal, you can check the signal receiver in the car to see if the fault is caused by the receiving end.
5. When Nissan Hill Descent Control is activated, the indicator light on the instrument panel will remain illuminated. For more information, see the "Hill Descent Control On Indicator" in the "Instruments and Controls" section of this manual. If the accelerator or brake pedal is depressed while Hill Descent Control is on, the system will temporarily stop operating. Once the accelerator or brake pedal is released, the hill descent control system will begin operating again if the hill descent control operating conditions are met. For best results, when descending a steep hill, turn on the hill descent control switch and place the shift lever in L (Low) for engine braking.